B-49916 Vinyl-Coated Swing-Up Grab Bar

Category: Grab Bars

Specification

Vinyl-Coated Swing-Up Grab Bar with reinforced joint shall be corrosion resistant, zinc coated steel pipe with vinyl antibacterial, biocompatible, and warm-to-the-touch coating. Grab bar shall have 3 mm wall thickness, 3 mm extruded plastic finish coating thickness, and 33 mm outside diameter. Back plate shall be 4 mm thick AISI 304 stainless steel, equipped with screw holes for attachment to wall. Swing-up Grab Bar shall be manually raised for approach or departure and lowered to horizontal position for support; grab bar is raised to upright position against wall and remains in vertical position until lowered to horizontal position.

Finish

White vinyl

Features

White vinyl antibacterial, biocompatible, and warm-to-the-touch coating. Swing-Up Grab Bar is manually raised for approach or departure and lowered to horizontal position for support;
grab bar is raised to upright position against wall and remains in vertical position until lowered to horizontal position. Swing-Up Grab Bar withstands loads of 150 kg if properly installed.

Dimensions

32 mm diameter, 708 mm depth in down position, 215 mm depth in up postion. Wall Plate: 145 mm width, 290 mm height

Notes

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and,
therefore, must be firmly secured in order to support the loads for which they are intended. To avoid
potential injury, the building owner or maintenance personnel should remove the grab bar from service
if the grab bar is not adequately secured to wall or if there is any observed damage to the welds.



Model Number: B-49916

Product Downloads

NBS Plus