B-5193 Folding Shower Seat


Folding shower seat has a frame constructed of type-304, satin-finish stainless steel that consists of 16-gauge (1.6mm), 30 mm square tubing and 18-gauge (1.2mm), 25 mm diameter seamless tubing. Seat shall be oneā€‘piece, 8 mm thick, solidly fused plastic laminate with matte-finish melamine surfaces, ivory-coloured face sheets, and black phenolic-resin core


Satin finish stainless steel and ivory-coloured phenolic


Integral slots for water drainage. Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into upright position. Bobrick shower seats, when properly installed, have sufficient strength to support 227 kg.


650 x 350 x 400 mm


SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 227 kg when properly installed and used. To avoid potential seat malfunction, DO NOT use seat if weight exceeds 227 kg.

Model Number: B-5193

Select Size & Finish Options

NBS Plus