B-980616x36 Vinyl-Coated Bariatric Grab Bar

Category: Grab Bars

Specification

Grab Bar shall be corrosion resistant, zinc coated steel pipe with vinyl antibacterial, biocompatible, and warm-to-the-touch coating with glossy finish. Grab Bar shall have 3 mm wall thickness, 3 mm extruded plastic finish coating thickness, and 33 mm outside diameter. Clearance between the Grab Bar and wall shall be 38 mm. Concealed Mounting Flanges shall be Type 304 stainless steel with 11 holes for three plugs and stainless steel screws for attachment to wall covered by fiberglass reinforced nylon sleeves. Flange covers shall be fiberglass reinforced nylon with glossy finish 21 mm thickness and 80 mm diameter, and shall snap over Mounting Flanges to conceal Mounting Screws. Ends of Grab Bar shall pass through concealed Mounting Flanges.

Finish

White vinyl

Features

Can withstand loads of 500 kg when properly installed. Intermediatemounting flanges for extra support strength.

Dimensions

32 mm diameter, 917 mm length, 38 mm wall clearance

Notes

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. To avoid potential injury, the building owner or maintenance personnel should remove the grab bar from service if the grab bar is not adequately secured to wall or if there is any observed damage to the grab bar.


Model Number: B-980616x36

Select Size & Finish Options

Product Downloads

NBS Plus